inspirational islamic quote do your best and allah will do this rest spiral notebook bless note book muslims faith graphic
For Xiaomi Redmi Note 10s M2101K7BG M2101K7BI M2101K7BNY M2101K7BL Charging Port Board
1. Charging port board replacement for Xiaomi Redmi Note 10s M2101K7BG M2101K7BI M2101K7BNY M2101K7BL. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation
0 Руб.
For Infinix Note 30 10pcs 0.26mm 9H 2.5D Tempered Glass Film
About Product:1. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.2. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.3. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.4. Smooth surface. Even the sides of screen film feels smoothly.5. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly.6. Durable. With good performance, it can work for a long time. Installation Instructions:1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.2. Peel the protective layer off the adhesive side.3. Carefully align the glass to the screen.4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions:1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas.2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it is been applied.3. Using excessive force who installing or removing the screen protector may damage the product
2 Руб.
For Xiaomi Redmi Note 11S 5G Original Middle Frame Bezel Plate (Black)
1. Middle frame bezel replacement for Xiaomi Redmi Note 11S 5G. 2. This part is used to replace your damaged or unworkable one with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. The installation of any new part should be done by a qualified person. We will not be responsible for any damage caused during installation
3 Руб.
TFT LCD Screen for Xiaomi Redmi Note 4X with Digitizer Full Assembly(White)
About the product 1. Replacement LCD display + touch screen digitizer assembly for Xiaomi Redmi Note 4X. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes 1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display
7 Руб.
TFT LCD Screen for Xiaomi Redmi Note 5 / Note 5 Pro with Digitizer Full Assembly(Black)
Before Installation Notes 1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.1. Replacement LCD display + touch screen digitizer assembly for Xiaomi Redmi Note 5 / Note 5 Pro. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed
8 Руб.
Power Button and Volume Control Button for Xiaomi Redmi Note 7 Pro / Redmi Note 7(Black)
1. Power button and volume control button replacement for Xiaomi Redmi Note 7 Pro / Redmi Note 7 2. Replace your broken or unworkable item with a new one 3. Each item has been checked and in good condition before shipping 4. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
0 Руб.
OLED LCD Screen for Xiaomi Redmi K20 Pro / K20 / Mi 9T / Mi 9T Pro with Digitizer Full Assembly(Black)
Before Installation Notes 1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. Replacement LCD display + touch screen digitizer assembly(OLED Material) for Xiaomi Redmi K20 Pro / K20 / Mi 9T / Mi 9T Pro. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. 7. Note: supporting fingerprint identification
34 Руб.
TFT Material LCD Screen and Digitizer Full Assembly (Not Supporting Fingerprint Identification) for Huawei P30
About the product 1. Replacement LCD screen + touch screen digitizer assembly for Huawei P30 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed 7. Note: No Fingerprint Identification Before Installation Notes 1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable does not over-bend. Over 90 degrees bent will cause black display
12 Руб.
Fingerprint Sensor Flex Cable for Xiaomi Redmi Note 9S / Redmi Note 9 Pro / Redmi Note 9 Pro Max(Black)
1. Fingerprint sensor flex cable for Xiaomi Redmi Note 9S / Redmi Note 9 Pro / Redmi Note 9 Pro Max. 2. Replace your broken or unusable item with a new one. 3. Each item has been checked and in good condition before shipping. 4. Completely fit and work. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
2 Руб.
For Samsung Galaxy S21 Ultra/ S30 Ultra mocolo 0.33mm 9H 3D Curved Full Screen Tempered Glass Film, Fingerprint Unlock Support
Description 1. Ultra-thin and excellent flexibility. The screen is thick. You do not need to worry whether the reflexes of your phone would slow down after pasting the film at all. 2. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users. 3. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual. 4. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort. 5. Smooth surface. Even the sides of screen film feels smoothly. 6. Convenient for use. It has excellent adhesion. To paste the film, you need to do is clean up the screen thoroughly. 7. Durable. With good performance and high quality, it can work for a long time. Installation Instructions 1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation. 2. Peel the protective layer off the adhesive side. 3. Carefully align the glass to the screen. 4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions 1. As this is a glass product, please note that the edges of the glass are vulnerable areas. 2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it is been applied. 3. Using excessive force who installing or removing the screen protector may damage the product
3 Руб.
LCD Flex Cable for Xiaomi Redmi Note 10 4G / Note 10s M2101K7AI, M2101K7AG, M2101K7BG, M2101K7BI, M2101K7BNY, M2101K7BL
1. LCD flex cable ribbon replacement for Xiaomi Redmi Note 10 4G / Note 10s M2101K7AI, M2101K7AG, M2101K7BG, M2101K7BI, M2101K7BNY, M2101K7BL 2. Replace your broken, damaged or non-working item with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
0 Руб.
For Garmin Approach S2 / S4 Two-color Silicone Watch Band(White Black)
1. Material: Silicone 2. Soft and comfortable to wear 3. Easy to assemble and will not damage the watch 4. The length of the strap is easy to adjust to fit your wrist 5. Two-color design, stylish and beautiful 6. Length: 126mm+87mm, strap width: 24mm, connecting head width: 16mm, weight: 27g 7. Product list: 1 pair of watch straps, 2 tool knives. Note: This product only has a strap, not the main body
2 Руб.
For iPhone 13 / 13 Pro 9D Full Glue Full Screen Tempered Glass Film
About Product:1. High hardness. This tempered glass screen film has a high hardness, so it can prevent itself from being scratched or broken into pieces effectively and continually. If broken, the tempered glass will break into small pieces that are not sharp, making it safer for users.2. High definition. The film has a high light transmission. With high light transmission and low light reflection, the film can provide you with a high definition screen just as usual.3. Functional. The screen protector can fit your phone well and make a big difference on protecting your phone from scratch, fingerprint, water, oil, dust, shock, slip and so on. When stained with water, soil, mud, oil or other attachments, it can be cleaned without effort.4. Smooth surface. Even the sides of screen film feels smoothly.5. Convenient for use. It has excellent adhesion. To paste the film, the only thing you need to do is clean up the screen thoroughly.6. Durable. With good performance, it can work for a long time. Installation Instructions:1. Please use the alcohol swab and the microfiber fabric to clean the LCD screen before installation.2. Peel the protective layer off the adhesive side.3. Carefully align the glass to the screen.4. Press the center of the glass then adhesive part will spread over all parts smoothly. Cautions:1. As this is a glass product, please note that the edges of the glass are the most vulnerable areas.2. When removing for re-use, the adhesive properties might wear off to an extent where the screen protector will not adhere to the device. It is not recommended to rouse the glass protector once it is been applied.3. Using excessive force who installing or removing the screen protector may damage the product
0 Руб.
TFT Material LCD Screen and Digitizer Full Assembly (Not Supporting Fingerprint Identification) for OPPO Reno5 F / Reno5 Z / Reno5 Lite / CPH2217 CHP2211 CPH2205
Before Installation Notes 1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. Replacement LCD display + touch screen digitizer assembly (TFT material) for OPPO Reno 5 F / Reno 5 Z / Reno 5 Lite / CPH2217 CHP2211 CPH2205. 2. Replace the old, broken, cracked, damaged one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. 7. Note: No Fingerprint Identification
9 Руб.
10 PCS Back Camera Lens For Xiaomi Redmi Note 11
1. Replacement back camera lens for Xiaomi Redmi Note 11. 2. Replace your broken or unusable item with a new one. 3. Completely fit and work. 4. Each item has been checked and in good condition before shipping. 5. Professional installation is highly recommended. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
1 Руб.
Glass Battery Back Cover for Xiaomi Redmi Note 9 Pro 5G/Mi 10T Lite 5G(Blue)
1. Back cover replacement for Xiaomi Redmi Note 9 Pro 5G/Mi 10T Lite 5G 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
1 Руб.