About The Product. The HDMI Over Single Coax Extender sends HDMI signals Over just one 75. Ohm Coaxial cable - up to 100m away. The HDMI Over Single Coax Extender supports HDMI 1.3 and HDCP 1.1 with features such as Deep Color and 1080p. By using standard and widely available 75. Ohm RG-6U cables, the HDMI Over Single Coax Extender makes HDMI signal extensions to be easier than heavy and expensive copper cable and more robust than optical fiber. The Extender includes two units: transmitter and receiver. The transmitting unit is used to capture the HDMI input with IR signals and carries the signals via one coaxial cable. The receiving unit is responsible for equalizing the transmitted HDMI signal and reconstructing IR and serial control signals. The Extender offers the most convenient solution for HDMI extension over a single coaxial cable with long distance capability, and is the perfect solution for any application. Features 1. Flexible extension of high-bandwidth HDMI 1.3 thanks to the performance and reliability of 75. Ohm RG-6U Coax cable. 2. Audio and video are transmitted digitally over the 75. Ohm RG-6U Coax cable with zero signal loss. 3. Single Link Range: 1080p/60, 12 bit color depth. 4. Compliant with HDMI 1.3, HDCP 1.1 standards. 5. Support digital video formats in Deep Color Mode at up to 12bits/color. 6. Support PCM 48KHz audio. 7. Support Cascade function in Transmitter and Receiver and it is easy to build a network system by installer. 8. Lip-Sync Pass Through. 9. Bi-directional IR system allowing for control of source or display (IR accessories included)
56 Руб.
1640 Руб.
1071 Руб.
881 Руб.
987 Руб.
2766 Руб.
4501 Руб.
4671 Руб.
1. Oscillation mode: PLL Synthesized 2. Frequency range: 572-603MHz 3. Preset channel: 40 channels separately set 4 groups 4. Operate mode: Manual adjust 5. Receiving mode: Single tuning. 6. Sensitivity: Deviation 25 khz, with conecting 7d. BuV,S/N greater than 78dB 7. Receiving range: More than 250FT 8. Comprehensive Reaponse: 50. Hz~15KHz+/-3dB 9. LCD Display shows clear working status 10. Low battery remind of bodypack receivers. Earphone output: 3.5mm jack 11. Power supply: 2 x AA batteries (not included) 12. Size: 8.0 x 6.5cm
26 Руб.
Features:1. RS232/485 device data collector/IoT gateway specially designed for industrial environments.2. Integrate multiple functions into one, including serial port server, Modbus gateway, MQTT gateway, serial port to HTTPD client, etc.3. The module has RS232, RS485, WIFI, and Ethernet interfaces, which can realize serial to WIFI, serial to WIFI and other functions; Ethernet, Ethernet to WIFI, etc.4. Multiple onboard power interfaces support a wide range of 6~36V power supply, and can be equipped with PoE function.5. Industrial-grade metal shell design supports wall-mounted and rail-mounted installation. It is small in size and easy to install.6. Suitable for data collection, IoT gateway, security IoT, smart instrument monitoring and other applications. Product parameters:1. Frequency band: 2.412-2.484 GHz 2. Wireless network: Station / AP / AP+Station mode 3. Security mechanism: WPA-PSK / WPA2-PSK4. Encryption type: TKIP/AES5. Transmission power:802.11b: +19d. Bm (max @11. Mbps)802.11g: +18d. Bm (max @54. Mbps)802.11n: +17d. Bm (maximum @HT20, MCS7); +17d. Bm (maximum @HT40, MCS7)6. Receiving sensitivity:802.11b: -89d. Bm (@11. Mbps)802.11g: -81d. Bm (@54. Mbps)802.11n: -73d. Bm (@HT20, MCS7); -71d. Bm (@HT40, MCS7)7. Baud rate: 300-460800 bps 8. Check digit: none, odd, even, mark, space 9. Data bits: 5-9 bits 10. Flow control: RTS/CTS N/A11. Protocol: TCP/UDP/ARP/ICMP/DHCP/DNS/HTTP/MQTT12. Configuration: host, browser, serial AT command 13. Communication method: TCP/IP direct communication, VCOM14. Working mode: transparent transmission, serial port command, HTTPD Client, Modbus TCP to Modbus RTU15. Working temperature: minus 40 degrees Celsius - 85 degrees Celsius 16. Humidity range: 5%-95% relative humidity 17. Product size: 85 x 84 x 24mm 18. Weight: 157g, 169g. Packing list:RJ45 network port-RS232/485 to WIFI Ethernet (B) x 1-2.4G Wi. Fi antenna x 1-Rail mounting buckle x 1-Screwdriver x 1-Screw pack x 1RJ45 network port supporting POE-RS232/485 to WIFI POE ETH (B) x 1-2.4G Wi. Fi antenna x 1-Rail mounting buckle x 1-Screwdriver x 1-Screw pack x 1
28 Руб.
1. Simple and easy, comfortable, easy to carry. 2. It adequately protects devices from the normal scratches, dirt, tear and wear. 3. 360 degrees rotation design makes horizontal viewing more convenient. 4. Access to all ports and buttons easily without removing the case. 5. With good performance and high quality, it may work for a long time
1 Руб.
1. Size: 90mm*70mm 2. Built-in high-elastic memory sponge, comfortable and soft 3. Accord with ergonomic design, fit the ear 4. Material: imitation leather
2 Руб.
Before Installation Notes 1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. Replacement LCD display + touch screen digitizer assembly(OLED Material) for Xiaomi Redmi K20 Pro / K20 / Mi 9T / Mi 9T Pro. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. 7. Note: supporting fingerprint identification
34 Руб.
Before Installation Notes. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. Replacement LCD Screen + Touch Screen Digitizer Assembly for i. Phone 11 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed
25 Руб.
1. Back cover replacement for Samsung Galaxy S9 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
2 Руб.
1. Back cover replacement for Samsung Galaxy S10+ 2. Replace your broken or unworkable back housing cover with a new one 3. Each item has been checked and in good condition before shipping 4. Completely fit and work 5. Highly recommend professional installation. We will not be responsible for any damages to your cellphone/mobile phone that you may cause during the changing of replacement parts
2 Руб.
© robinzon-tur.ru 2013-2023. All Rights Reserved