robinzon-tur.ru

i14 Pro Max N86, 4GB+32GB, 6.3 inch, Face Identification, Android 10 MTK6737 Quad Core, Network: 4G, with 64GB TF Card (Blue)

Features 1. MTK6737 quad core processor, good performance, combined with 4GB+32GB memory, fast run and smoothly operate. 2. 6.3 inch 1014 x 480 pixel fullscreen, small body, wide field of vision. 3. 2.0MP front camera, 5.0MP rear cameras, take high clear picture. 4. Support face recognition, support WIFI + BT + FM + GPS, 3.5mm headphone interface and micro 5 pin charging interface. 5. Powered by 2400m. Ah high capacity battery, long time to standby and use. Network 1. 2G network frequency: - GSM 850/900/1800/1900 MHz 2. 3G network frequency: - WCDMA 850/1900/2100 MHz 3. 4G network frequency: - FDD-LTE B1/B2/B3/B4/B5/B7/B8/B20/B28A/B28B - TDD-LTE B38/B39/B40/B41

USB-хаб Satechi Aluminum Type-C Multi-Port Adapter 4K with Ethernet (3xUSB 3.0, Type-C, RJ-45, HDMI, SD, micro-SD), Серебристый Док-станция ST-TCMAS

USB-хаб Satechi Aluminum Type-C Multi-Port Adapter 4K with Ethernet (3xUSB 3.0, Type-C, RJ-45, HDMI, SD, micro-SD), Серебристый Док-станция ST-TCMAS

USB-хаб Satechi Aluminum Type-C Multi-Port Adapter 4K with Ethernet (3xUSB 3.0, USB Type-C, RJ-45, HDMI, SD, micro-SD), Серый Док-станция ST-TCMAM

USB-хаб Satechi Aluminum Type-C Multi-Port Adapter 4K with Ethernet (3xUSB 3.0, USB Type-C, RJ-45, HDMI, SD, micro-SD), Серый Док-станция ST-TCMAM

USB-хаб Satechi Aluminum Type-C Multi-Port Adapter 4K with Ethernet V2 (3xUSB 3, Type-C, RJ-45, HDMI, SD, micro-SD) Серебристый Док-станция ST-TCMA2S

USB-хаб Satechi Aluminum Type-C Multi-Port Adapter 4K with Ethernet V2 (3xUSB 3, Type-C, RJ-45, HDMI, SD, micro-SD) Серебристый Док-станция ST-TCMA2S

Док-станция Satechi Aluminum Type-C Multi-Port Adapter 4K with Ethernet V2 (3xUSB 3.0, USB Type-C, RJ-45, HDMI, SD, micro-SD), Серый ST-TCMA2M

Док-станция Satechi Aluminum Type-C Multi-Port Adapter 4K with Ethernet V2 (3xUSB 3.0, USB Type-C, RJ-45, HDMI, SD, micro-SD), Серый ST-TCMA2M

USB-хаб Satechi Aluminum Thunderbolt 3 Pro Hub Adapter with Ethernet (2xUSB 3.0, USB Type-C, RJ-45, HDMI, micro-SD), Серый Док-станция ST-TCPHEM

USB-хаб Satechi Aluminum Thunderbolt 3 Pro Hub Adapter with Ethernet (2xUSB 3.0, USB Type-C, RJ-45, HDMI, micro-SD), Серый Док-станция ST-TCPHEM

Док-станция Satechi Type-C Slim Multiport with Ethernet Adapter (2xUSB 3.0, USB Type-C, HDMI, RJ-45, SD, micro-SD), Черный ST-UCSMA3K

Док-станция Satechi Type-C Slim Multiport with Ethernet Adapter (2xUSB 3.0, USB Type-C, HDMI, RJ-45, SD, micro-SD), Черный ST-UCSMA3K

USB-хаб Satechi USB4 Multiport Adapter with 8K HDMI (2xUSB 3.2, USB 2.0, Type-C, HDMI, RJ-45, Micro/SD, 3.5 mm), до 100 Вт, Серый космос ST-U4MA3M

USB-хаб Satechi USB4 Multiport Adapter with 8K HDMI (2xUSB 3.2, USB 2.0, Type-C, HDMI, RJ-45, Micro/SD, 3.5 mm), до 100 Вт, Серый космос ST-U4MA3M

USB-хаб Satechi USB-C Multiport Adapter 8K With Ethernet V3 (5xUSB Type-C, HDMI, RJ-45, SD, micro-SD), Черный Док-станция ST-P8KED

USB-хаб Satechi USB-C Multiport Adapter 8K With Ethernet V3 (5xUSB Type-C, HDMI, RJ-45, SD, micro-SD), Черный Док-станция ST-P8KED

USB-хаб Satechi USB-C Multiport Adapter 8K With Ethernet V3 (5xUSB Type-C, HDMI, RJ-45, SD, micro-SD), Серый космос Док-станция ST-P8KEM

USB-хаб Satechi USB-C Multiport Adapter 8K With Ethernet V3 (5xUSB Type-C, HDMI, RJ-45, SD, micro-SD), Серый космос Док-станция ST-P8KEM

Real Time Clock Support Micro-SD 128GB for EZ-Flash Omega for Compatible with EZ-refor EZ4 ez-flash EZ 3 in 1 Reform

Litchi Texture Horizontal Flip 360 Degrees Rotation Leather Case for Galaxy Tab A 10.1 (2019) T510 / T515, with Holder (Black)

1. Simple and easy, comfortable, easy to carry. 2. It adequately protects devices from the normal scratches, dirt, tear and wear. 3. 360 degrees rotation design makes horizontal viewing more convenient. 4. Access to all ports and buttons easily without removing the case. 5. With good performance and high quality, it may work for a long time

OLED LCD Screen for Xiaomi Redmi K20 Pro / K20 / Mi 9T / Mi 9T Pro with Digitizer Full Assembly(Black)

Before Installation Notes 1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. Replacement LCD display + touch screen digitizer assembly(OLED Material) for Xiaomi Redmi K20 Pro / K20 / Mi 9T / Mi 9T Pro. 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. 7. Note: supporting fingerprint identification

Original LCD Screen for iPhone 11 with Digitizer Full Assembly(Black)

Before Installation Notes. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display. About the product 1. Replacement LCD Screen + Touch Screen Digitizer Assembly for i. Phone 11 2. Replace your broken or unusable item with a new one 3. Make your device look more refreshing than ever 4. Completely fit and work 5. Each item has been checked and in good condition before shipping 6. Professional installation is highly recommended. We will not be responsible once the screen is installed

TFT LCD Screen for Galaxy J7 (2017) / J7 Pro / J730F/DS, J730FM/DS,AT&T with Digitizer Full Assembly (Black)

About the product 1. Replacement LCD display + touch screen digitizer assembly (TFT Material) for Samsung Galaxy J7 (2017)/J7 Pro J730F/DS, J730FM/DS,AT&T; 2. Replace your broken or unusable item with a new one. 3. Make your device look more refreshing than ever. 4. Completely fit and work. 5. Each item has been checked and in good condition before shipping. 6. Professional installation is highly recommended. We will not be responsible once the screen is installed. Before Installation Notes 1. Tips 1: Test before installation When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity. Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone. Ensure you wear eye protection and use caution not to cut your finger with the glass splinters. 2. Tips 2: Simulates testing Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it can not show, please contact us at the very first time. And please do not force it to be installed in mobile phone. We will not be responsible once the screen is installed. 3. Tips 3: Do not over-bend cable Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display

For iPhone SE 2022 / SE 2020 Magnetic Buckle Retro Crazy Horse Texture Horizontal Flip Leather Case with Holder & Card Slots & Photo Frame(Brown)

1. Concise: it is simply shaped and turned to leave a pure and comfortable impression on everybody. 2. Functional: the case can fit your phone well and make a big difference on protecting your phone from scratch, shock, slip and so on. 3. Convenient: all buttons and ports are accessible. 4. Portable: it is unnecessary for you to take it off once your phone puts it on because it is quite thin and light. 5. Durable: with good performance and high quality material, it may work for a long time